LamCam™ Aerial and Die Mount Cams
NAAMS Cams
Anchor Lamina NAAMS aerial and die mount cams are a joint development effort between automotive and Lamina Engineers. Our aerial cams and die mount cams have been manufactured to meet or exceed all the NAAMS heavy duty cam requirements. These high performance, high volume production cams are available in 8 sizes, from 50 mm to 300 mm from stock. Install LamCam™ NAAMS die cams for a number of stamping die cam applications. Engineering support for cam applications is available for die builders and die designers.
Heavy Duty / High Volume NAAMS Approved LamCam™
Aerial Cam and Die Mount Cam Sizes
| Slide width (mm) | 50 | 75 | 125 | 150 | 175 | 200 | 250 | 300 |
|---|---|---|---|---|---|---|---|---|
| Aerial Cams | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Die Mount Cams | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
See the Aerial Cams and DieMount Cams catalogues for detailed specifications and installation guidelines.
Heavy Duty / High Volume Cams Features:
- Ease of spring replacement from back of cam; the cam base incorporates a safety restraint system to retain the slide during spring removal
- High quality materials used throughout, including high-strength steel castings for major components
- All wear areas are double-plated with self-lubricated wear plates to reduce maintenance and accommodate high production volumes
- Three Return Spring Kit options are available; mechanical ISO spring, combination mechanical/nitrogen springs and nitrogen spring
- Pentahedron design ensures smooth and stable slide movement on 125 through 300 Series Cams
- Urethane bumper cushion on slide return; Optional hydraulic shock absorber available
- Mounting/locating provisions include square keys and dowel holes
- Meets or exceeds "NAAMS" cam requirements
- Lockout kit installed, ready for cam installation and set up
- Safety backup provisions for retaining keeper plates
- Improved, super-duty accelerator system standard on 0 through 50 degree angles
- Dual external positive return system
Return Spring Kit Options
Recognizing that different cam applications have different requirements, Lamina offers three Return Spring Kit Options:
Mechanical - Employs conventional ISO Die Spring - used in cam applications where additional stripping force is not required.
Combination Mechanical/Nitrogen - This unique Lamina design employs an ISO Die Spring in series combination with a Nitrogen Spring. This return system utilizes the mechanical spring for pre-load, keeping the initial contact forces low, while providing high final loads from the nitrogen spring for stripping.
Nitrogen - This return system provides high return spring forces for stripping. By nature of the nitrogen spring, it also has higher initial contact force than other return spring options. This higher initial contact load may result in higher wear on the cam and its accelerator system (where applicable).
Aerial Cam Installation Tool
Be sure to order your Aerial Cam installation tool when you order your Aerial cams. The kit simplifies the installation of LamCam™ aerial cams potentially saving you time as well as effort.
CAD and Solid Model Files
Engineering CAD and Solid model files are available for download. Files for NAAMS Aerial and Diemount Cams are available in DXF, and STEP formats.
Die Cam Questions? Cam Troubleshooting?
Anchor Lamina is committed to giving and maintaining superior customer service. Contact us for die cam assistance.
© 1997-2006 Anchor Lamina Legal
© 2002-2006 Agora Global Networks Inc. Design XHTML CSS
