Portable Hydraulic Equipment
Lamina has been manufacturing quality portable hydraulic equipment and hydraulic motors for over 45 years.
Portable Heavy Duty Hydraulic Drill,
Tapping and Drilling Equipment
Lamina manufactures a durable, high-power Portable Hydraulic Drill. By combining power and portability in a single drill, this hydraulic drilling equipment effectively functions in a broad spectrum of applications. The hydraulic drill delivers remarkable power in openings as narrow as 9¼ inches.
Because of its power and versatility, Lamina's portable heavy duty hydraulic drill and tapping equipment is used in many industry sectors including metal stamping, nuclear power, ship building, mining, construction, oil pipelines, oil rigging, and bridge building. The portable hydraulic units are available with your choice of 3-phase voltage rating.
Six hydraulic drill heads are available
Six hydraulic drill heads are available as optional equipment. Drill heads are fully interchangeable with the hydraulic power unit and feature quick disconnect fittings so you can use the drill head most suited to your application. Drill heads can be fixtured for special applications and can be ordered without a magnetic base. Manual and manual/automatic power feed drill head models are available.
Six Hydraulic Drill Heads Available
See the Lamina Hydraulic Equipment catalogue for specifications and drill head equipment options.
Hydraulic Drilling Equipment Video
Press the play button to start the Hydraulic Drilling video. This video is 7MB large.
Hydraulic Equipment Rental Program:
Lamina offers several programs that make it easier to purchase, rent or lease-to-own Lamina Hydraulic Equipment. More details are available about our rental programs in the Hydraulic Equipment Rental Agreement.
Portable Electronic Die Setter - 4 Cylinders
One compact, low profile wheeled cabinet contains all the equipment you need for all the punch spotting, die setting and die separation jobs in your shop. This die setter is completely portable with self-retracting hose reels and pendant.
Each Die Setter has two modes of operation:
- Unify Mode - Cylinders will extend until each makes contact with the die; cylinders will subsequently lift uniformly, creating a synchronous lifting system.
- Parallel Mode - Cylinders will extend uniformly, at the same rate, and act as a synchronous jacking system. To initiate this mode, cylinders must be fully extended or fully retracted.
See the Lamina Hydraulic Equipment catalogue for specifications.
Portable Electronic Die Setter - 6 Cylinders
The 6 cylinder Electronic Die Setter is best suited for larger, heavier stamping dies that require extra lift at the center to keep the die level during separation. It is ideal for dies that have six safety pad areas. The 6 cylinder die setter offers additional flexibility as it can be used with 4 cylinders or 6 cylinders for a lift capacity of 30 or 45 tons respectively. The unit can also act as a synchronous jacking system.
See the Lamina Hydraulic Equipment catalogue for specifications.
Electronic Die Setter Die Separator Video
Press play button to start the video. This video is 12MB large.
Portable Hydraulic Die Separator
The Lamina die separator offers a portable die separation solution for dies weighing 2,500 lbs. and up. Two die separator models are available: a 15 ton maximum lift capacity and a 30 ton maximum lift capacity die separator. The die separator is completely portable with self-retracting hose reels and pendant. The hydraulic die separator can be used for any lifting application where a synchronous lifting or synchronous jacking system is required. The compact, wheeled cabinet contains all the equipment you need for any die separation job.
See the Lamina Hydraulic Equipment catalogue for specifications.
Hydraulic Cylinders for Die Separator and Die Setter
Lamina hydraulic cylinders include three stock sizes of 4", 6" and 9" (closed) with a stroke range of 1½" to 6¼". Capacity per cylinder is 15,000 lbs. Other hydraulic cylinder sizes and strokes available by special order. Cribbing rings, pads, and accessories are available for all hydraulic cylinders.
See the Lamina Hydraulic Equipment catalogue for cylinder specifications and cribbing ring safety guide.
Portable Hydraulic Power Unit
The Lamina portable hydraulic power unit is suitable for outdoor and indoor use. The hydraulic power unit is mounted on casters and is easily moved right to the job site. The hydraulic power unit is equipped with 15 feet of hydraulic pressure hoses with quick disconnect fittings. The hydraulic power unit is 44.5 inches long x 24.5 inches wide x 54.5 inches high. The Lamina portable hydraulic power unit can be supplied ready for your hydraulic attachments.
Please see the Lamina Hydraulic Equipment catalogue for more details.
© 1997-2010 Anchor Lamina Legal
© 2002-2010 Agora Global Networks Inc. Design XHTML CSS
